Denso Tank Protection Linings and Systems
For Technical Data Sheets, please click on our Online
Denso Archco Linings - Internal Linings for Corrosion Control
The new Archco system provides internal corrosion coating protection for: Crude,
Gas & Diesel Tanks, Ethanol Tanks, Petrochemical Tanks, Heat Exchangers, Knock Out
Drums, Chimes Areas, Bund Areas, Pressure Vessels and Internal Pipes & Valves.
Archco Linings Brochure
Primer - Two Part Epoxy Primer
A low VOC, two component coating that provides excellent protection on aboveground steel and concrete surfaces.
Primer - Two Part Organic Zinc Primer
An organic zinc rich epoxy polyamide primer for protection of steel. It has excellent performance in salt and heavy
Primer - Two Part Inorganic Zinc Primer
An inorganic zinc rich epoxy polyamide primer for protection of steel. It has excellent performance in salt and heavy
400 Epoxy - Two Part Epoxy Phenalkamine for Internal Tank
Archco 400 Epoxy is a two-part epoxy-phenalkamine system designed as an internal tank lining and primer with superior
wet-out properties. The system has excellent low-temperatures cure properties.
400HB Epoxy - High Build Two Part Phenalkamine Epoxy for Internal Tank Linings
Archco 400HB Epoxy is a 85% solids two-part epoxy designed for internal tank linings. The coating has excellent low temperatures cure properties.
- Vinyl Ester Glass Flake Coating
Corrosion protection for oil storage tank linings, filtration vessels, ion exchange
vessels, effluent streams and water treatment facilities. Also, used for the protection
of process vessels, stacks, ducts, fume scrubbers, fan cases and many other corrosive
Epoxy - Two-Part, Epoxy for Fast-Return-to-Service, Internal Tank Linings
Archco 430 Epoxy is a 100% solids, two-part, epoxy phenalkamine system designed for fast return-to-service, internal tank
linings. The coating has excellent, low-temperature cure properties.
Epoxy - Two Part Epoxy for Internal Tank Linings
Archco 450 Epoxy is a high solids two-part epoxy designed for internal tank linings.
The coating has excellent low temperatures cure properties.
Epoxy - Two Part Epoxy Phenolic
Archco 460 Epoxy is a two-part high solids epoxy phenolic designed for internal tank and pipe linings.
Epoxy - Two Part Glass Flake Epoxy
Archco 470 Epoxy is a high solids two-part epoxy designed for internal tank and pipe linings.
Epoxy - Epoxy Lining for Ethanol Tanks
Archco 480 Epoxy is a 100% solids, two-part, epoxy cycloaliphatic-amine system designed for fast-return-to-service,
internal tank linings. The coating has excellent, low-temperature cure properties and resistance to ethanol.
Archco Epoxy Tank Caulk
- Two Part Caulk Epoxy for Internal Storage Tanks
Archco Epoxy Tank Lining is a 100% solids, hand-applied epoxy caulk designed for sealing of
rivets and smoothing of seams in storage tanks.
Denso Weathershield 65- High Solids Aliphatic Polyurethane
Used as a topcoat over Protal Liquid Coatings to provide color coding, abrasion
resistance, chemical resistance and UV stability. Will cure at temperatures as low
as 40°F (4°C).
Tank Base and Chime Protection System
Employing a series of tapes and coatings, Denso's Tank Base and Chime Protection System will help seal gaps at the base to protect the tank
from further corrosion at these vulnerable areas and shield it from environmentally corrosive agents.
Tank Base Protection System
- Layered Tape System to Protect the Chime Area From Corrosion
Corrosion protection system that protects the tank base and chime area by sealing gaps on the concrete / metal base where water and air
normally penetrate to corrode the tank base.