Denso Liquid Coatings

For Technical Data Sheets, please click on our Online Catalog

Protal 7000 - High build pipeline coating - brush grade
A fast cure, one coat epoxy coating that can be hand applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines.

Protal 7000 Airless Spray - High Performance Epoxy Coating
Solvent free two-pack high build high performance epoxy coating which is applied with conventional airless spray equipment.

Protal 7200 - High build, fast cure pipeline coating
A fast cure, one coat epoxy coating that can be hand or spray applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines.  Exhibits excellent cathodic disbondment properties at 175°F (80°C) with 7 mm disbondment.

Protal 7250 - High build, fast cure pipeline coating
A fast cure, one coat epoxy coating that can be spray applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines.  Exhibits excellent cathodic disbondment properties at 175°F (80°C) with 7 mm disbondment.  Protal 7250 is used in Canada only and is the spray grade version of Protal 7200.

Protal 7125 - Fast cure, low temperature pipeline coating - winter grade
A low temperature coating that can cure at -4°F (-20°C).  The coating can be backfilled in 30 minutes at 50°F (10°C).  Used for girth welds, tie-ins, rehabilitation, repairs to FBE and sacrificial coating to FBE.

Protal 7900 - High temperature pipeline coating
A high build epoxy coating that can be hand applied to girth welds, tie-ins, fittings and rehabilitation of existing pipelines.  Maximum operating temperature up to 250°F (121°C).

Protal 7200 Repair Cartridge - Fast Cure Epoxy Repair Coating
Repair coating for damaged FBE and other liquid coated pipelines.  Also used as coating of cadweld areas.

Protal 7125 Repair Cartridge - Fast cure high build pipeline repair coating
A fast cure pipeline coating that is packaged in cartridge tubes and applied with a dispensing gun.  The coating can be backfilled in 30 minutes at 50°F (10°C).   Used for girth welds, tie-ins, repairs to FBE, rehabilitation, sacrificial coating to FBE and caldwelds.

Protal ST Epoxy Mastic - Surface tolerant liquid epoxy
A fast drying surface tolerant epoxy coating that can be hand or spray applied to wire brushed rusty steel surfaces.  Used for above and below ground pipelines, structural steel, bridges, tanks, and other steel surfaces.

Denso Bitumen Mastic - Single component bitumen mastic coating
A high build single component cold applied liquid bituminous coating.  Used for corrosion protection of buried pipe, flanges, valves and fittings.

Denso Weathershield 60 - High Gloss Aliphatic Polyurethane Topcoat
Used as a topcoat over Protal Liquid Coatings to provide color coding, abrasion resistance, chemical resistance and UV stability.  Will cure at temperatures as low as 40°F.

Denso Epoxy Putty Stick - General purpose adhesive and stopping compound
As a general purpose adhesive and stopping compound.  Also used for cable joint sealing and filling.