West Texas

A leading midstream company in West Texas required recoating for several storage tanks with areas of loose coating and corrosion. To streamline the process and minimize labor costs, Archco 381 was selected for its ease of application and superior performance.

Efficient Surface Preparation & Application

Since the majority of the existing coating remained intact and well-adhered, a full abrasive blast to bare metal was unnecessary. Instead, the tanks’ exteriors underwent a power wash to remove contaminants. Areas with bare steel and loose coating were sweep-blasted to an SSPC-SP7 standard. These prepared sections were then primed with Archco 300 epoxy primer at 2-3 mils DFT. Archco 381 was then applied in a single-coat roller application, achieving a 7-9 mils WFT thickness across the entire tank exterior.

Cost Savings & Efficiency

By utilizing Archco 381 in a single-coat application, the company reduced labor costs by 30-40%. This cost reduction was achieved by eliminating the need for full abrasive blasting and priming of the entire tank surface, streamlining the recoating process.

Denso’s Commitment to Quality

Denso remains dedicated to providing innovative, user-friendly coatings that meet and exceed industry performance standards. Additionally, NACE-certified technical service representatives are available to offer expert guidance whenever needed.

With Archco 381, the company achieved a cost-effective, high-performance solution for extending the life of its storage tanks.