Protal 610 CTE™
A two-part high build coal tar epoxy that has low VOC’s and can be applied as a single or two-coat system to protect steel or concrete substrates.
Protal 610 CTE Low VOC™ is a two-part high build coal tar epoxy that has low VOC. It can be applied as a single or two-coat system. It uses polyamide technology with excellent abrasion and chemical resistance. For long-term corrosion protection of steel and concrete substrates against water, wastewater, seawater, alkaline water and acidic water corrosion.
Protal 610 CTE Low VOC is designed to coat steel piles, sheet piles, lock gates, reservoirs, non-potable water pipelines, treatment / storage tanks, bridges and many other aggressive industrial applications.
< Back To Protal Coatings Products Page
Request Safety Data Sheets (SDS)- 0.2 lbs/gal (24 g/l) VOC
- Excellent resistance to water, seawater, wastewater, alkaline water and acidic water
- Good impact resistance
- Excellent flexibility, hardness, and adhesion
- Excellent abrasion resistance
- No primer required
- High build 16 to 25 mils (406 to 635 microns) in one coat
- Can be used with cathodic protection systems
- Exceeds Corp of Engineers C-200, C200a
- Exceeds AWWA C-210 for exterior
- Can be brush or spray applied
-
Protal 610 CTE
datasheet
-
Protal 600 CTE, 610 CTE and 650 CTR Spray Application - Spec Guide
application instructions
