Protal 7125™
A fast-curing, high-build liquid coating designed for low-temperature environments and substrates. Winter Grade. It can be applied in-service or during pipeline construction in the field.
Protal 7125 is specifically formulated to be applied to colder substrates at colder ambient temperatures. It is a high build liquid coating that is brush or spray applied in one coat to many areas of in-service pipelines or during pipeline construction in the field. It cures fast to allow quick handling and backfilling, even down to -4°F (-20°C). Protal 7125 is intended for use where a quick cure is required at lower substrate and/or ambient conditions such as during winter applications or on colder operating temperature pipelines.
< Back To Protal Coatings Products Page
Request Safety Data Sheets (SDS)
- Cold temperature application down to -4°F (-20°C)
- Will not freeze when applied to substrates below 32˚F (0˚C)
- Fast cure, fast initial set
- Will cure when submersed in water after application
- High build (up to 50 mils / 1270 microns in one coat)
- Excellent adhesion (compliments FBE coated pipe)
- High abrasion resistance for drilling applications
- Can be used as an abrasion resistant coating (ARO)
- Compatible with cathodic protection systems
- Does not shield cathodic protection
- Repair cartridges available (50 ml and 825 ml)
-
Protal 7125 Brush Application - Spec Guide
application instructions -
Protal 7125 Spray Application - Spec Guide
application instructions -
Quantity Estimate Table - Protal Products
application instructions -
Estimating Calculator for Protal Products - Excel File
application instructions
-
Protal Liquid Coatings Brochure
literature
-
Protal Accessories
datasheet
