Bore-Wrap resin hardens as it cures. It is a single component resin that activates with water so no mixing is involved. The fiberglass architecture does not “cure” as fiberglass is already in it’s final state. To check the cure, use a Calibrated Shore-D gauge on...
Bore-Wrap is a simple application and can be completed with as few as 3 people or as many as 10. The time to apply is usually measured in feet per minute. With 3 people doing a girthweld protection, it is about 1.5 feet per minute. With 6 to 10 people performing a...
No. Bore-Wrap® is a sacrificial outerwrap and does not shield CP. Its purpose is to protect the underlying corrosion coating so that CP can function properly after installation.
Unlike liquid coatings, Bore-Wrap® is a composite laminate that resists shear, gouge, and impact forces. Epoxies may resist abrasion but are often brittle under HDD stresses, while Bore-Wrap flexes and absorbs energy. Bore-Wrap is an additional mechanical...
Recent Comments